!44: iPhone Repair: The Way to Replace a Verizon iPhone Screen

!±8± iPhone Repair: The Way to Replace a Verizon iPhone Screen

There are many tools needed to perform this repair. You may want a flathead, Phillips, and petalobe screwdrivers. You are going to also need to have a plastic and metal soft pry tools

Step One.

You are going to need to have to make use of the phi lips or the petalobe screwdriver (depends upon the model of the iPhone) to get rid of the two screws situated on the bottom of the iPhone. They're next to the charging port and speakers.

Step Two.

As soon as the screws are removed, you're ready to take the back cover off the iPhone. Simply slide the cover up and lift it out of the telephone. Ensure not to press down on the glass cover due to the fact it could simply break.

Step Three.

The subsequent step would be to remove the battery from the iPhone housing. In order to do this, you are going to must take away the screw holding the battery terminal in location. When this really is carried out, you can eliminate the terminal from the logic board and lift the battery out of the housing. Use the clear tab plus a plastic pry tool to help lift the battery out.

Step Four.

The subsequent step demands you to remove the two screws that hold the charging port flex cable in place together with the metal tab on best of it.

Step Five.

Subsequent, you may must get rid of all of the screws holding the black metal cover and 1 screw from a metal clip that's subsequent to it. These metal clips be sure that the connections don't come of the motherboard from vibration or dropage. As soon as the screws are removed, take the metal covers off the motherboard.

Step Six.

Next, take away all of the flex cable connectors from the logic board. The following connectors will need to be removed; digitizer screen, camera, antenna, charging dock, volume button, energy button, headphone jack.

Step Seven.

Soon after the connectors are removed, you may must get rid of the rest of the screws inside the iPhone. 3 of these screws call for the flat head screwdriver to get rid of. Also, among the screws is situated in the corner underneath a black sticker exactly where the camera was located.

Step Eight.

As soon as all the screws are removed, you might be now ready to remove the motherboard. Lift the board out of the housing by lifting the back finish very first and making sure that you clear all of the flex cables with out damaging them inside the method.

Step Nine.

The subsequent move is to take the speakerphone and antenna assembly out of the iPhone.

Step Ten.

Subsequent, remove the vibration module by making use of your dull blade and sliding it underneath the motor. Attempt to keep the adhesive intact.

Step Eleven.

You'll find ten more screws which you will must handle. The 4 screws located in the four corners of the iPhone will need to be removed. The six wider screws with washers situated on the sides of the housing will have to be lightly loosened.

Step Twelve.

Lastly, we can now begin to get rid of the screen from the iPhone. Use your dull blade to separate the screen from the aluminum housing and start off from the bottom of the screen close to the home button. Do this until the screen is out of the iPhone.

Step Thirteen.

You are going to need to eliminate the metal grill along with the plastic camera holder from the old screen assembly to ensure that you'll be able to use it again with your replacement screen.

So that you can reassemble the iPhone, just follow these methods inside the reverse order. Please use our detailed repair videos which have detailed instructions and tips. If this seems like a difficult repair to perform, please pay a visit to our iPhone repair section for our skilled iPhone repair service.